Tuesday, July 30, 2013

Hey! Adobe! My keyboard has a pause key.

And I'll bet yours does too.  Look at it.  Every PC keyboard has a 'pause' key and since they are now just PCs running a Unix clone with a bunch of proprietary crap on top, so do Macs. 

So, Adobe programmers, since you make video playing software, don't you think that maybe, you should have put the said key to use.  You'd think that people might want to occasionally pause a video they are watching.  You'd think that it would be convenient to do so by simply pressing a key labeled as such and that pretty much goes unused by other programs.  But NoooOOOoooo!  You had to leave it to us to grope for the mouse (or whatever), jiggle it to find the cursor, navigate it to the right place, and then click on the little picture of a stereo control.  You're now on the List.

Monday, July 22, 2013

Forms Form Factors.

I live in California.  There are three documents you need to have on you when pulled over by a cop, license, proof of insurance, and the registration of the car.  Like most people I keep them in my wallet.  And that sucks.

It's bad enough that they aren't the same size.  Their dimensions aren't even integer multiples of each other.  My drivers license is the same size as a credit card.  That has been the case with every other one I've seen, whatever the state, whatever the country.  And, for some reason, the dimensions are odd in both Imperial and Metric (3 3/8", 86mm X 2 1/8", 54mm).  Why couldn't they have made it 3" X 2" or 85mm X 35mm?  You could fit all the information in there.  But I digress.

Let's just call the current dimensions W and H.  My proof of insurance is 1.21W X 2.22H, with plenty of white space (it is actually pink paper but pink space is a weird term.).  It could easily be made W X 2H with all the room needed for the required information.  My registration is even worse at  2.49W X 2.57H.  With even more white space.  There is a 6" bar code along the top.  I've never seen it scanned.  My reader couldn't, probably because it's been damaged from being folded up to fit it in my wallet, which is the case with almost everybody's.  The back has a bunch of address and phone numbers that everyone would go to the internet to get before looking at their registration.  So, using the back and skipping the unreadable bar code, all the information could put on a W X 2H form as well.

But NoooOOOoooOOOOoo.  For some reason the DMV and Insurance companies just pulled some random sizes out of their asses.

For this reason the employees who made those decisions and their bosses, all the way up, are on The List.

Thursday, October 25, 2012

Another Rant about Packaging.

Why is peanut butter still sold in tall skinny jars?  When you get to the bottom, no standard butter knives are long enough.  To get the last of it you have to either find something long enough to reach the bottom or just get your hands covered with the stuff.  Neither is acceptable with the options we have today.

Jelly manufacturers have offered squeeze bottles for years now.  I've seen mustard in tooth paste type tubes.  The only places you can find ketchup in glass bottles is in restaurants, and the only reason I can imagine they do this is so people will give up before getting all they want out of those bottles.  For fucks sake, they've invented spray on cheese.  What all this shows is that the food industry isn't afraid of changing their packaging.

Why is peanut butter mired in the old "jar" paradigm when so many other options exist for packaging goopy substances.

It could be packaged the same plastic tubes that caulk comes in.  Of course the shortcoming of this is that you couldn't really use a standard caulking gun in the kitchen.  You'd need something plastic without a lot of crevices, but that could be made or perhaps somehow integrated with the tube containing the peanut butter. 

It could be sold in plastic bags similar to those ones that pastry chefs use for frosting but with a re-closeable fitting.  This would have the advantage of getting smaller as you consume the peanut butter because storing containers mostly of air sucks.

Then there is the good old tooth paste tube for smaller amounts.  This would be perfect for lunch boxes.

Features for a communter bike.

I recently had my bike stolen.  That sucks, but it was my own damn fault for not locking it properly.  Nevertheless I had to buy a new one.

I only use my bike to get around town.  My last one was what the bike marketing people called a "hybrid", which, as near as I can tell means "cheap mountain bike".  It wasn't a good commuter.  Being bent over made it impossible to adequately check behind for traffic, I had to get off the seat at each light, and the bar gave my balls an uncomfortable squeezing, it looked too high-tech, attracting thieves and it had too many gears.

From this experience I came up with a list of features I wanted in my new one.

1) Sitting Upright:  Since I'm not trying to be Lance Armstrong, I don't need to minimize my forward profile (if that phrase makes any sense).  I want to be able to look behind me without going through weird contortions.

2) Cargo Capacity:  On my old one I added a rack with collapsible baskets, which served my needs most of the time.  Unfortunately they were inadequate for large items.  This time I opted for a gigantic basket (big enough for a 10 ream paper box) in the rear.  I wish it were detachable so I could use it as a shopping basket in the grocery store, alleviating the need for bags.

3) A Reasonable Number of Gears:  I never took the front derailleur off the middle gear on my last bike so I figured that a 7 speeder would be enough for me.

4) A Two Prong Kickstand:  Loading up the old one was a real hassle.  It just wouldn't stay up when I put anything in the baskets or was trying to bungee something to the rack.  The two pronger keeps it standing upright and centred, making loading up much easier.

5) A Woman's Frame:  Since the reasons it is called a woman's frame no longer apply some are now calling it a "step through frame".  For whatever reasons the difference in frames started, it is no longer reasonable to have the two designs for get around town bikers.  The "step through" frame is good for everybody.  Women can bike in skirts and men don't have worry about rupturing themselves on the bar should they fall of the seat or wiggling their nuts around it at lights.  Secondly it is impossible to mount a "men's" framed bike when there is mass cargo in the back.

A) Fenders:  I don't live in a really rainy climate so I didn't care one way or another about them.  Those that live where they have weather might.

I bought one and modified it to meet these criteria and am very happy with it for the most part.  I did neglect to consider the brakes.  For some reason bike makers seem to think that city bikes don't need brakes to be as good as they do for mountain bikes.  I would argue that they need to be as good or better than mountain bikes.  The mountains don't have cars trying to kill you or pedestrians in ear buds jumping into the street.

I also didn't consider bells.  I occasionally do ride on the sidewalk.  Usually it is only to when it is the only way to get from the street to where I'm going to park it, or the reverse.  Fortunately the bike I bought had one, but I plan to get rid of it in favor of a few jingle bells on a bit of string, or maybe, a card in the spokes.


After reviewing this before posting and experiencing a couple of flats, some things have changed.

The bike should have some kind of glove compartment type box.  It just needs to be big enough to hold a patch kit and the required tools, and be secure enough to deter a snatch and grab type thief.

I've changed my mind about fenders.  I'm agin'em.  They made repairing a flat, even in my own driveway, much more difficult than it needed to be. 


Tuesday, October 25, 2011

Fuckin' Ikea.

First let's talk about their layout.  It is designed to make you walk past everything they have.  They claim that there are shortcuts but they are not readily apparent or signed well.  This is fucking deliberate and evil.  If there is ever a fire, lots of people are going to die and it will be their fault.

When the zombie apocalypse happens Ikea stores will be a good tool for dealing with them.  Once they're inside they will never find their way out.

I only went there for a replacement transformer for a lamp I had because they made it unfixable.  Opening it was difficult enough. the plastic case was sealed with a solvent.  What really sucks is that half the components were under a black blob, so that even if I bothered to figure out which one was at fault, I wouldn't be able to replace it.

Of course I couldn't just buy a new transformer.  That would hurt lamp sales.  Being impatient I decided to just be a sucker and buy the lamp.  Of course they don't have a lamp section in the showroom, so I had to work out what type of room they expected that type of lamp to be used in before I could buy one.

I finally found it.  It works but probably won't last long.

What happened to the middle market, something between Ikea and Herman Miller?  Whenever I want something of good quality without a bunch of bullshit prestige branding I have to scour the thrift stores and garage sales for something from the '60's or earlier.

Sunday, September 25, 2011

Some things I've learned from moving.

1) Get rid of your crap. - I've lived in the same place for 20+ years.  The amount of crap you can accumulate in that period is unbelievable.

2) Know where your stuff is. - I've managed to acquire multiple instances things no one will ever need more than one of; 3 offset screwdrivers, 4 sets of jeweler's files, 2 popcorn popers and I don't know how many nut drivers of various sizes.  I wound up in this situation by needing an item and not knowing where it was and simply buying a new one.

3)Live out of boxes. - Rounding up the boxes and putting my shit in them has been one of the more difficult parts of this move.

I don't know how this is going to turn out financially, selling my crap versus the expense of having it hauled may end up costing me money or leaving some extra in my pocket.  I guess I'll find out.

Thursday, September 1, 2011

American Money.

I'm not going to talk about the shortcomings of fiat money, U.S. monetary policy or why Keynes was an assbag.  Plenty of others have done that far better than I could.

I am going to go on about the design flaws in physical U.S. currency.  This will all be old news to any foreigner who has traveled here, so you guys might as well just read an older post.

As any foreigner traveling in the U.S. can tell you, our money is confusing.  The notes are all the same color and size and the physical dimensions and apparent materials of the coins tell you nothing of their value.  The reasons for this all make sense historically but who wants to learn the history of a foreign countries money when traveling.  We just want to pay for our stuff and get on.

Let's take a look at the coins arranged by size.
This is not the correct denominational order.  So, lets show the color.  The world has a history of the values of metals being copper<silver< gold, so lots of countries use alloys resembling those metals to denote their coins.
But not the U.S.  The above is still not correct. 

Now let's look at them in the correct order.
We have .01, .05, .1, .25, .5 and 1.  They are labeled, stupidly, in prose, and sometimes in terms only an American or maybe, a Canadian would understand, for a couple of them. "one cent", "five cents", "fifty cents" and "one dollar" are as bad as it gets.  But, some time in the past some jackass at the bureaucracy of money designing decided to use colloquial terms on the coins.  No one should expect a foreigner to understand "one dime" and "quarter dollar".

Now to the notes.  In most of the world the notes are different colors and sizes.  Most tourist have stated that they prefer it this way.  I agree with them about the color, but I still prefer a uniform size, to make it easier to arrange things in my wallet.

You don't need multiple sizes to accommodate the blind.  You can just clip corners.

$100, Two diagonal corners clipped.
$50, two corners adjacent on the long side clipped.
$20 two corners adjacent on the short size clipped.
$10 three corners clipped.
$5 all corners clipped.
$1 stop making them and go to a coin like every dollar denominated country in the world.

This even leaves room for them to inflate and reissue $500 and $1,000 notes again.

What really sucks is that they have recently redesigned the currency and didn't fix any of these problem.  Whoever made those decisions deserves to get eaten by zombies.

Thursday, July 28, 2011

PC Powersupplies.

Will someone explain to me why the ATX power supply doesn't have switched AC like the old AT ones.

Yes, I know that monitors and printers go into sleep mode when not receiving any data, but they're still drawing some power, which is a total waste when the computer is off.

Electricity is part of my rent so I'm not that motivated to find out how much power is being consumed by such devices in my life, but I do wonder is how much power is consumed by standby peripherals versus wall warts when not in use.

It's also important to remember that speaker amplifiers don't have any kind of sleep mode.

So, PC power supply makers, give us back the switched AC on the back of our power supplies.

As an aside, why doesn't anyone make a speaker amplifier that you can put in to the PC case and power it with the 12 volts and just run the audio lines to the speakers?

The Problem with Touchscreens.

Engineers and designers frequently get too excited about the new.  Touch screens seem to be the latest iteration of this.  Apple decided that since they were going to have one on their iphone that there was no reason to have a physical keyboard, and simply used software to put a keyboard on the screen.  Great for them.  Physical keyboards cost money.  Not having one leaves more money is Steve Jobs's pocket.

They work for anyone who doesn't have adult sized fingers or doesn't want to enter anything longer than a twitter message.  Just try to do a significant amount of text entry.

Secondly they chose to use the capacitive type that doesn't require a stylus.  I can sees some reason behind this.  Losing styluses sucks.  But how hard is it to place it back in the holder when you are done.  I've never lost one.  And who but a nine year old girl has fingers small enough to use those on screen keyboards?

But what sucks about the no stylus approach is that with screens as small as those on a phone, selecting an area that is only a few pixels is pretty much impossible.  Have you tried to move the cursor between two specific letters.  It takes several tries. 

To make matters worse,  Google, in all their designy brilliance decided to not include full bluetooth functionality, so you can't use an HID bluetooth keyboard with the Droid.  Fucking geniuses.

Friday, July 22, 2011

"Swag" not "Schwag"

I just went to my last Comic Con, the reasons for which I won't be addressing here.  One reason I won't miss it is that I will hear fewer people referring to the swag as "schwag".  I had hoped that this was just the latest incarnation of 133t speak or whatever they call the insane contractions people use in SMS messages.

Sadly, it turns out that it isn't.  Far too many people think that it is the historic term.  They need a fucking dictionary.

Here is a brief and abridged history of the word leading to it's current usage.  It was originally referred to a bulgy bag, later to miscellaneous belongings and still later, in the late eighteenth century, to stolen goods and finally, it's current usage,  to promotional shit.  Check the OED if you doubt me.

The trendoids "schwag" only goes back to 1995.

Yes, there is fun to be had with humorous mispronunciations, but be aware when you are doing it.  Fucking hipsters

Thursday, July 14, 2011

Some Gaps in the English Language.

There are several gaps in Prescriptive English and they bug me.

1) The lack of a plural "you".  In the hillbilly states of the U.S. they have "y'all".  Unfortunately that dialect has a lot of negative connotations, so people avoid the term.  Interestingly, I've noticed that younger educated people from that region tend to speak with a more standard version of American English, probably to avoid  those connotations.

Fuck it.  I come from a non-"y'all"ing part of the country and have made the deliberate choice to use it.

2) No marked distinction between an exclusive and inclusive "or".  Most programming languages have it.  This is especially difficult when spoken.  You never how your interlocutor interprets the colloquial "or" so you are forced to use ugly constructions to specify like "a or b but not both" and "a or b or both".  In writing it's easy you just put down "and/or".

I would love to see "xor", pronounced "ex-or" enter the language, spoken and written.  The advantages in spoken English are clear.  It also makes things easier in writing, no more clusmsily trying to reach that pesky "/" key, that only expert typist can seem to hit consistently.

3) a gender/number neutral pronoun, if only to avoid some feminist rants.  I have no problem defaulting to a gendered pronoun when the sex of the person can be reasonably inferred with reasonable accuracy.  Hypothetical construction workers are "he"s and hypothetical nurses are "she"s.  It's the hypothetical server that is the problem.

And then there is the problem that you don't always know how many people you are talking about.

Sadly, every solution to this situation is ugly and I can offer none better.

Saturday, May 7, 2011

A Few Simple Features Bicycles Have Lacked since the Beginning.

I live and work in the semi-urban part of my town.  The buildings on the main streets are two or three stories high with store fronts on the ground floor and apartments or offices on the floors above with a few seven or eight story buildings scattered about and few parking lots.

Because of this, except for my main shopping day and an occasional trip to BFE I use my bike to get around.

I think people like me are an under served market segment.  I don't need a 36 speed, super shocked, hard core mountain bike or a ball crushing, a seat up the ass racing bike.  Since there lots of hills in the area, a simple one speed cruiser will not do either.  But, believe it or not, that isn't the subject of this entry.

As an apartment dweller in an area with lots of retail establishments, bike storage is a problem.

I can't keep it outside.  Like retailers, bums like to be where the foot traffic is.  It makes for better panhandling.  The problem is that when the panhandling doesn't pan out (yuk yuk), they steal, and they will steal anything, including parts of an unattended bicycle.  It would take a good ten minutes to secure all the parts of a bike well enough so that they couldn't be stolen.  And then there is the weather issue -- rain being bad for metal and all.

So that leaves keeping it in my apartment, which I do and it sucks.  With the handle bars, pedals and room to lean it, a bike takes up as much room as a small couch.

My ceilings are only eight feet high, so suspending it isn't an option.

I looked into folding bikes and they aren't for fat people.  At three bills, I'm way over their weight limits.  Even if I was in shape, they couldn't handle my weight and a couple bags of groceries.  So they're out.

The thing is, all the manufacturers need to to is enable us to quickly and easily significantly reduce one dimension of of the bike.  The easiest would be the width, that is just handle bars and pedals.  It would be fairly simple to make the pedals flip up and back and latch in their positions.  A similar mechanism could be made for handle bars.  This is not difficult engineering.  People have been making collapsible things for thousands of years.

One last thing I want is a parking brake.  As it stands now I can't lean it against the wall without the front wheel rolling and the bike falling.  My low tech solution is a length of bungee cord tied around the handle that I use to hold the brake down when the bike is in my apartment.

I don't think I'm asking too much of the manufacturers.

Finally, it must be remembered that once the walking dead have overrun the earth, the infrastructure for cars will be gone, yet it will be a few years before the roads are impassable by bikes.

Unfortunately our concerns won't be limited to zombies.  Other survivors can't be counted on to be as civilized as they once were, so we will need to take our bikes into our hidey holes at night.  Given the expected weight loss in this situation, a folding bike would be fine.

Tuesday, April 5, 2011

Fountain Pens, Seriously?

For a number  of years now, I've seen people pull fountain pens out of their pockets whenever a signature is called for.  I've always assumed they were pretentious posers and probably, even worse, lawyers.

I recently discovered the Pilot Varsity, a disposable fountain pen, and decided to try it out to see what the big deal was.  I was not impressed.  It felt like a gel pen when writing and it shared the major shortcoming of gel pens.  If the paper is curling and the tip makes any contact, ink flows.  Worse, I was playing with the cat, whipping the pen back and forth for him to bat at it and and it flung ink out.  I can just see these on the playground.  Kids would be having ink fights.

It turns out that the Bic Crystal, a 60 year old design, is still the most practical pen around.  The hexagonal body prevents it from rolling too far.  The transparent body lets you know when you should think about a replacement.  It won't leak in your pocket, even if you loose the cap.  It's cheap.  It's sturdy, you can put it in your back pocket and sit on it with out breaking it.  I even found one under the carpet of my car several years after I bought it and after some coaxing it still wrote.  Finally the ink is thick enough and the point sturdy enough that it requires some serious pressure to write with it.

I understand that artists and calligraphers might have uses for fountain pens, but not the rest of us.

When the zombies come, all the diaries will be written with Bic Crystals or pencils.

So, yes, fountain pens are for pretentious posers.

Wednesday, February 16, 2011

Bring Back Normal Monitors.

I had to buy a new monitor semi-recently.  This was a disappointing experience.  I could not find a normal (4 x 3) monitor.  In every store I looked in there were only wide screen (16 X 9) monitors available.

What the fuck!?  Are computers becoming toys now?  I'm sure that some jerkwad is saying to himself "but a lot of video comes in wide screen and I like the big panorama when I'm playing Killoshooto" or whatever.  Get yourself a TV and game console. 

Wide screens suck for doing anything with text.  Have you tried reading a several two foot lines of text?  You have to keep bobbing your head back and forth, not to mention the difficulty of simply visually tracking a line that long, especially when the asshole designer decided that some sans-serif font looked pretty.

For working with text, a vertical aspect ratio would  be best, something like 21/2 X 1, the same as the European A series standard for paper.  Unfortunately the this isn't realizable on laptops due to the need to accommodate keyboards, and it would be more maddening to have two separate standards, one for desktops and another for laptops.  So let's just go back to 4 X 3, it's a reasonable compromise.

I don't see that happening.  If the display manufacturers can shove one format down everyones throats they will.  It's cheaper than having multiple formats.  Bastards.

Of course another solution is available.  UI designers could offer another window sizing button - a "vertical maximize" which would give you window of (screenHeight/21/2) X screenHeight.  The designers of text based applications and web pages could optimize for such a display ratio, reading on-line is easier for everyone and peace, love and harmony will reign throughout the universe.

Yeah, I don't see that one happening either.

Sunday, February 6, 2011

Toilet paper holders

Have you ever thought of toilet paper holders.  Few have,  But one person did and came up with a brilliant design.

Public bathrooms have some considerations regarding the dispensing of toilet paper beyond those for the home.  These are that people will steal anything, even a half used roll of toilet paper and they will overuse what they don't pay for.

The manufacturers of toilet paper holders for public bathrooms have come up with some ugly solutions to these problems.  One method to prevent theft is to place a locked cover over the roll with just the end sticking out.  Another is to use strange sized rolls, usually under the same locked cover.

To prevent over use they will usually have some kind of mechanism to stop the roll from turning after so much rotation, or they will have a lot of friction making it impossible to pull out a decent amount without tearing it into shreds.

As I said, these are all ugly solutions, especially for small businesses that aren't going to get a contract with a janitorial supply company and are just going to buy their toilet paper at the local store.

Fortunately someone has come up with a holder that balances the needs of preventing over use, theft and the need to use standard rolls.

You'll note in the picture that the axle for the spindle is off center.  This prevents the roll from gaining momentum as someone pulls paper off thus preventing over use.

But, the real brilliance here is the spring loaded axle.  The only way to remove the spindle is to pull the axle inside which can't be done with a roll installed.  You have to wait until the roll is empty, then tear off the core to pull the axle inside, thus preventing theft.

As you can see, it uses standard rolls.

This shows that a lot of simple, mature technology has room for improvement.

There aren't many zombie issues here since they don't poop and those of us left alive will scared shitless anyway.

Sunday, January 2, 2011

My Irrational Love of Mechanical Watches

I love mechanical watches.  I've never really been able to explain it, but I'm going to try here, but I'll probably just come up with a bunch of rationalizations.  Here ' goes.

  • They require no consumables.  You don't need to take them to some drug store to have the battery replaced.  This will come in handy when you need to know how long you have until dark so you can get back to your base camp in safety when being hunted by flesh eating hoards of the undead.
  • They tick.  As one gets older, there is some comfort in hearing your watch through your pillow.
  • ...Uhm
  • Er...
Ok, that didn't work.  Two realish reasons are all I could come up with.  I will have to accept the fact that it is just an aesthetic preference.

I can't claim that there is any kind of simple elegance.  They're very complicated mechanisms.  Now days they are using synthetic sapphires and rubies in them.  While those are cheap to make, there is something decidedly inelegant about creating a high tech infrastructure for a low tech product.

While accurate enough for any normal life stuff, they don't come close to quartz watches for accuracy.

They're not cheap.  If you want to impress the Joneses, you can spend tens of thousands of dollars on one.   But you can also spend that amount on a quartz model and get the same social climbing cred.  A decent mid-range mechanical will cost about $500.00.  A good quartz can be had for $150.00.

So, I guess I have to confess a preference for stupid design here.

But Damn, there is just something insanely cool about getting the kind of accuracy and reliability that they do from springs, levers and gears.

Friday, December 17, 2010

Staples and Their guns.

The other day, my Black & Decker PowerShot staple gun failed to reset, again.  Usually banging it on the side of the table would do the trick, but not this time.  I banged and banged to no avail.  I checked for jams.  There were none to be found.  It was broken.

I decided to take it apart and see if I could find something loose or broken and easily replaced.  This failed.  As soon as I removed the last screw and separated the halves of the case it went all splody sending several parts around the room, propelled by the springs inside.  So be it.  Repairability was a long shot on something this cheap.  There is always a trade off to be made between initial manufacturing cost and repairability.  When something is cheap the balance usually leans towards low manufacturing cost.  I had already resolved to buy a new one if I couldn't fix this one, so I wasn't too upset.

You'd think this would be an easy enough endeavor—You'd think.  I went to Target and picked up a Stanley TR45 and some staples.  I was only planning to staple some thin polyethylene tubes so I didn't need a heavy duty model.  The one thing I liked about this was that you could open it to clear jams.

The packaging said it took JT21 staples so that's what I bought, but he damn things didn't fit.  They were slightly too narrow to fit on the rail upon which they slide.  Figuring I just got a bad batch of staples I went to my Local Ace hardware and bought another box from another manufacturer.  They didn't fit either.

So the staple gun was the one that was mis-made.

What the Fuck!  These are staples and staple guns, not mechanical watches.  The tolerances aren't that tight. Cheap Chinese manufacturing shouldn't be a factor here.  If I were stapling up a tarp to hide a camp fire from the ravenous undead, I'd have been fucked.

Since burning the gas to return it would cost almost as much as the thing costs I decided to try to fix it by bending in the edges of the rail.  This didn't work so I just threw it away.

I then went back to my local Ace and bought an Arrow T50 because the box claimed it took the same size staples I already bought and it was made in the U.S.  It worked fine.

The poorly made staple gun was bad enough but why isn't there an industry standard for staple sizes?  There is for the office type paper staplers.  ISO has standards for pretty much everything else.  Seriously, if it can be measured ISO probably has a standard for it.  As an American I know that the standard sized staples wouldn't be available to me since they would be metric, but the more things that have an international metric standard, the more pressure there is for the U.S. to finally get with it.

When the dead rise to mack on our brainy goodness we are going to need to do a lot of improvisation.   We are not going to have the luxury of making return trips to the deserted hardware stores for consumables of just the right dimensions or dealing with tools that can't even do what they are manufactured to do.

Wednesday, December 8, 2010

The Yankee Screwdriver

I've recently re-discovered a piece of retro-tech that should never have been abandoned, the Yankee screwdriver, and I don't seem to be the only one to have done so.

These are the screwdrivers where the blade is turned by the user pushing down on the handle.  Ask Mr. Google for pictures and a more elaborate description of how they work.

They seem to have fallen from fashion with the introduction of cordless electric screwdrivers and drills, which I am now abandoning.

Let's consider the downsides of the standard manual screwdriver.  First, they're slow.  You can let go and reposition your hand on the tool only so many times in a given time frame and your wrist can only be rotated so much.  For a long screw this can be annoyingly time consuming.

Secondly, it is difficult to keep them centered when repositioning for the next turn, especially with that bane of humanity, the slotted screw.

For years now, people have been using corded drills to drive screws.  This is usually fine on the bench or when working on a medium sized piece that doesn't involve moving around a lot, tangling the cord and creating a trip hazard, but not when you are moving around a large piece of furniture or something along those lines.  And frequently you have to dig up an extension cord, just to use it.

Cordless drills solve the problems of cord tangling and the need for an extension cord but then there is the problem that no one has managed to invent a battery that doesn't suck.  They never seem to be charged when you realize you need them so you have to find something else to do while you charge the battery.  After a number of chargings they fail to hold much of a charge.  They are always in some proprietary, unopenable enclosure so it is frequently cheaper to buy a new drill than it is to buy new batteries.  When you really want to apply a lot of torque they drain quickly.  And they are big and clunky.

Dedicated cordless power screwdrivers are just junior versions of the drills, with the size problem somewhat mitigated.

One shortcoming of all the power options share is that you really can't control the speed of rotation or feel the torque being applied to the screw. 

The Yankee has none of these failings.

It is powered by your own muscles, meaning no battery or cord and you can feel what you are doing and it won't run out of power.  You push it up and down so you don't have to reset it for multiple turns.  And they are small and light.

I believe that there are several reasons it failed in the market.  One is that people, especially male people, are easily seduced by the latest gizmo. I know I am. 

Probably, the major reason they failed is that they Stanley failed to adapt.  The major shortcoming of the Yankee was the bits.  When the cordless electrics came out, they used the, what are now standard, hexagonal bits, which were already in use in bit switching manual screwdrivers.  The Yankee used Stanleys* own style bits which when lost were hard to find and expensive to replace.  I don't know why Stanley failed to change the Yankee to accept the standard bits.  It could be that they thought that thought that they could get away with what printer manufacturers are doing now, trying to keep people locked into a proprietary format.  Or, since they made the electric drills and screwdrivers they may have thought that the Yankee was just obsolete.  Or it could have been just an oversight.  I don't know.

The Good news is that there are still lots of them to be found at flea markets, garage sales, thrift stores and on Ebay and there are several companies making adapters so you can use the hexagonal bits with an original Yankee.

The better news is that two companies have started making them.  One is a Chinese company that is called Isomax or Easypower.  It's hard to tell what is the company name and which is the product name from the packaging.  The other is A German Company called Robert Schröeder.  The Chinese company makes a 17 inch one and Schröeder makes an 8.5 incher an 11.5 incher and a 17.5 incher.  All take the hexagonal bits except for the Schröeder 8.5 incher, which uses the old Stanley style bits but it does have bit storage in the handle.

I bought the Chinese one and the Schröeder 8.5 incher.  The Chinese one is as well made as any genuine Yankee I've seen.  It has a plastic handle which some people might see as a shortcoming but I think it's better than wood.  The length can make it somewhat unwieldy but this would also apply to the long Schröeder.  Because of this I use the Schröeder the most.  When building a computer I pretty much only use the Phillips #2 bit which stays in the chuck so the limited bit choices aren't that important.  If I ever need to use some of the other bits I have a genuine Yankee and an adapter, although I suppose I could use the adapter with the Schröeder.

They do make drill bits for these, which makes sense they are also know as push drills.  I've never used them as drills so I don't know how well they work as such and the only bit size that seems to be available is for drywall screws.

The fact that these don't need electricity to work and can tighten and remove screws quickly means that this is something you're definitely going to want during and after the Zombie Apocalypse.

*I don't approve of possessive apostrophes and I'm not using them unless the noun is plural and pluralized with an "s".

Tuesday, November 23, 2010

Alarm Clocks

I just can't seem to find an alarm clock that just doesn't suck.  The makers of these things all seem to think that everyone works the same hours five days a week, has perfect vision, and never mis-presses a control.

There are plenty of alarm clocks out there with large numerical displays.  That isn't the only thing people need to see.  Now days most have little icons on the face to tell you if the alarm in engaged, whether it will be the radio or a chime when it goes off, whether you are in standard or summer time (kind of useless),  your time zone (more useless), AM/PM (I'd be just as happy with 24 hour time) and I'm sure some things that escape me right now.

I don't have much problem with the displays, but there is room for improvement.  The icon that shows whether or not the alarm in engaged should be large enough for someone who wears glasses to see it without them.  The rest can remain small or simply leave the indication to the position of the switch on the back.

Color could be used.  Most are still segmented LED displays.  With two primary color LEDs for each segment you would have the possibility for three colors them.

Red & green gives you the additional possibility of yellow.
Red & blue gives you the additional possibility of purple.
Green & blue gives you the additional possibility of cyan, but this is hard to distinguish by eye.

The color of the display could be used to show AM vs. PM.  The color of the icon could be used to show whether alarm will be the chime or the radio.  There are other options to be worked out through user testing.

Buttons are a huge issue.  Almost every alarm clock I see has buttons of the same shape and size with the function labeling molded in or in small type adjacent to the button itself.  Neither option is good for someone with poor vision in a poorly lit or dark room.

I know that the Genius Designers will hate this.  They all seem to want to be in MOMA, but this is a fucking tool.  Each button should have a distinctive shape and/or color indicating it's function and should, of course, be as large a practicable.

Mistakes should be back-outable.  The one I have now (the RCA RP5430) has a Nap button which simply starts a countdown selectable in ten minute increments.  This is a nice feature.  The only problem is that you can't back out of it, or, if you can, the way to do so isn't apparent without reading the instruction sheet that I threw out ages ago.  When I accidentally hit it I have to set it to its minimum time and wait for it to go off before I even think of going to sleep for real.

Lastly a word about functionality missing in every alarm clock I've looked at  As I've mentioned, not everyone gets up at the same time every day of the week.  I have four different times in an average week.  Changing the alarm four times a week sucks.  I'm sure that there are some with even more wake up times than me and I'm sure it sucks more for them.  Sometimes people who share a bed have different schedules for getting up.  This means that a non-sucky alarm clock would have one preset per person per day of the week, fourteen in all.  Add another for unusual occasions for fifteen.

What sucks is that making an alarm clock with these features isn't hard or costly.  Modern programmable processors are cheap especially in bulk.

I'm not sure about the usefulness of an alarm clock after the zombie apocalypse.  Survivors should travel in groups to watch each others backs and to have someone to stand watch while the others sleep.  An alarm clock would only serve to attract the undead.